How To Back Half A Car

Posted on

How To Back Half A Car – Due to supply chain shortages across the company, we are currently experiencing longer than normal delivery times. Email sales@ for updated time frames.

We currently have a delivery time of 4-6 weeks. If you would like an updated ETA on parts, please email us and we will be happy to help.

How To Back Half A Car

How To Back Half A Car

Due to industry-wide shortages, we are experiencing longer production and delivery times than usual. Most large units are made to order and shipped by freight.

Fs (for Sale) 79 Rear Glass And Trim

DISCLAIMER:  T.E.Designs makes no express or implied warranties with respect to any product and/or installation, including but not limited to warranties of merchantability and fitness for a particular purpose. Products and/or installations are intended for site use only. Therefore, products and/or installations do not match the vehicle’s features or specifications. The buyer acknowledges that the purchase and/or installation of these parts may render the vehicle illegal to operate on public roads. The Buyer further acknowledges that no representations are made regarding the performance, safety or quality of these parts and/or their installation in the Buyer’s vehicle and that the parts and/or installation may void the warranty. TE Designs shall have no liability for any damage, injury and/or death caused directly or in connection with TE Designs products or installation. Buyers must refer to their cage manual to meet specifications and adjust as necessary. The buyer releases TE Designs, its employees, partners and affiliates from all liability and waives their right to legal recourse against TEg Designs and its employees, partners and affiliates. TE Designs is not responsible for shipping damage or items lost in transit. The customer must take their own action against the shipping provider or intermediary. By purchasing this product, you agree to all of the terms listed. This is your home page, a one page online store. All images and text on this page can be changed to personalize the site and tell your customers your unique story.

*Note* 26 “is the narrowest width available for the back half of the 2×4. The brackets are welded inside the frame rails for -7″ of the total back half width. For example: a 26″ wide rear half has 19” outboard racks

* Each back half is custom. Please allow 3-4 weeks from date of purchase for item to ship.

Checkered Race offers the following return policy: If you are not completely satisfied, please contact Checkered Race within 30 days. We will repair or replace any defective products. Please contact our customer service representative at 812-325-0819 from 7:30 AM to 4:30 PM Eastern Time. Returned product is subject to a restocking fee and must be returned in its original condition to the following address: 2221 N. State Hwy 43, Spencer, IN 47460 USA. Our shop number for installation assistance is now 812-606-7223.

Back Half Shock Towers

DISCLAIMER OF WARRANTY: The buyer is responsible for determining the suitability of all products purchased from Checkered Racing. Buyer understands and agrees that racing parts equipment and services manufactured and/or sold by Checkered Racing are subject to different conditions due to the manner in which they should be installed and used. Buyer further acknowledges and agrees that the suitability of any part sold or manufactured by Checkered Racing for a particular application is at Buyer’s discretion and that Buyer does not rely on Checkered Racing’s skill or judgment regarding the suitability of any product or service. . Checkered Racing makes no warranties, expressed or implied, oral or written, to purchasers. No commercial warranty is provided by the purchaser with respect to racing and racing equipment, except for specific products covered by a limited lifetime warranty as set forth below. Limited Lifetime Warranty: This warranty is limited to specific products manufactured by Checkered Racing and the original owner only. Proof of purchase will be required. Claims must be submitted in advance to Checkered Racing. A copy of the original invoice and $30.00 (handling and shipping must be included). Liability is limited to repair or replacement of defective parts to the original purchaser. Checkered Racing shall not be liable for any consequential damages, expenses or injuries resulting from the use, misuse or improper installation of any product manufactured or sold by Checkered Racing. Checkered Racing reserves the right to make design changes, additions or improvements to its product without any obligation to install the same on any previously manufactured products. This warranty does not apply to any product which may be covered by another warranty or which has been repaired or altered in any way to, in our judgment, affect its performance; nor has it been subject to abuse, misuse, negligence or any other incident beyond the control of Checkered Racing. From road rods to racing cars, Checkered Racing is your suspension connection. We manufacture and sell a complete line of rear halves and front ends to suit your needs. Our back halves are available in whatever size you need for your project. You can order them at any level of completion with any options you want. I’m not saying it’s cheap, but can you get this Half Duster Drag Car project back?

This is a bit misleading. A lot has already been done to this car including a full cage, rear half, showers, aluminum sheet metal and much more. Sure it takes a lot to finish, but I hope some 15 year old who is saving allowances, birthday money, and Christmas money buys and spends the next few years turning into something bad. It was pre-set for the 440, had disc brakes in the front, and was a powerful California car. We are sure there are some tubes that we like to massage and such, but for the right person, this can be a good ride. Look and you can see it too.

Know someone who would like a ride like this? Can you imagine what you would have thought if you were a teenager watching this for the first time? I know I will be drooling trying to figure out how to do it before my parents talk me out of it.

How To Back Half A Car

1975 Plymouth duster Dragcar, all pros fully rolled, includes shower, rear half, aluminum panels, fiberglass hood studs, sux pack hood setup (not pictured), aluminum dash, front disc brakes, fuel cell, oil pump assembly , plate engine kit for a big block 440, lots of work and new parts already done, needs paint, custom built, straight car no rust, special need $2500 cash only

Back Half Materials…. Or Am I An Idiot…

The NHRA Lucas Oil Drag Racing Series Division 2 Open National is LIVE here! Rough start: 1972 Ford Torino base, just added an engine Due to major supply chain inefficiencies, we are currently experiencing longer than normal delivery times. Email sales@ for updated time frames.

This WIY rear half kit fits 1996-2013 Chevy wide cabs. This works with the Chevy EXT WIY cabin kit.

Due to industry-wide shortages, we are experiencing longer production and delivery times than usual. Most large units are made to order and shipped by freight.

DISCLAIMER:  T.E.Designs makes no express or implied warranties with respect to any product and/or installation, including but not limited to warranties of merchantability and fitness for a particular purpose. Products and/or installations are intended for site use only. Therefore, products and/or installations do not match the vehicle’s features or specifications. The buyer acknowledges that the purchase and/or installation of these parts may render the vehicle illegal to operate on public roads. The Buyer further acknowledges that no representations are made regarding the performance, safety or quality of these parts and/or their installation in the Buyer’s vehicle and that the parts and/or installation may void the warranty. TE Designs shall have no liability for any damage, injury and/or death caused directly or in connection with TE Designs products or installation. Buyers must refer to their cage manual to meet specifications and adjust as necessary. The buyer releases TE Designs, its employees, partners and affiliates from all liability and waives their right to legal recourse against TEg Designs and its employees, partners and affiliates. TE Designs is not responsible for shipping damage or items lost in transit. The customer must take their own action against the shipping provider or intermediary. By purchasing this product, you agree to all of the terms listed. Well, I’m not one to go along with everyone else for the most part, and I’m always trying to find a cheaper/better way to do something. Now with that BS out of the way here is my question.

Pro Line Racing 1/10 Back Half Cage For Pro Line Cab Only Crawler Bodies

I know that reasonable people, if they go to the task of cutting their own car in half, will do it in a way

How to back half a drag car, how to back half a car, how much does it cost to back half a car, back half drag car, back half car, how to hike half dome, how to back half a unibody car, how to half double crochet, how to find half siblings, back half race car, how to make half apron, back to back half marathons